Gaming On Mac Pro 12 Core

Posted By admin On 12.04.20

Crucial Memory and SSD upgrades - 100% Compatibility Guaranteed for apple Mac Pro 12-Core Mid 2010 - FREE US Delivery. Crucial Memory and SSD upgrades - 100% Compatibility Guaranteed for apple Mac Pro 12-Core Mid 2010 - FREE US Delivery. Gaming memory and storage. How Crucial DRAM and SSDs add speed for creatives. 3.33 12 core I got a Mac pro from ebay without processor and Gpu Successful upgraded to 12 core 3.33 (got from ebay) + Gainward gtx 680 already flash with macrom I'm using the system since 4 months without any problems, powered on all the day, launching all kind of benchmarks without any problems. My set up Mac pro 2010 2x3.33 64gb ram Gtx680. Feb 04, 2020  In 2019, the MacBook lineup changed considerably as Apple discontinued the 12-inch MacBook and 15-inch model MacBook Pro. The change brings to four the number of Apple laptops we recommend for gaming purposes. In terms of overall performance, the 6-core Mac Pro was an impressive 65 percent faster that the previous high-end stock Mac Pro, the 2012 12-core Mac Pro with two 6-core Intel Xeon processors. As this model technically originally was a 'configure-to-order' configuration of either the Mac Pro 'Quad Core' 3.7 (Late 2013) or Mac Pro 'Six Core' 3.5 (Late 2013), and also became a custom configuration option for a version of the Mac Pro 'Eight Core' 3.0 (Late 2013), starting April 4, 2017, it does not have its own order number.

Mar 18, 2015  PC Gamer's guide to gaming on a Mac. The Xeon processor options range from a 3.7 GHz quad-core chip to a 2.7 GHz 12-core processor. The quad-core Mac Pro.

Twelve cores and twenty-four threads—that's what I'm sitting in front of. Even after owning an 8-core Nehalem Xeon Mac Pro, I just wasn't prepared for the 8 extra threads in my new shiny new 12-core Westmere Xeon Mac Pro. It's just that crazy. Sometimes, you look up at the menu bar and you think that Iran has Photoshopped extra iStat CPU bars up there, to convince you of this machine's awesome powers:

Every time that happens, I hear a Black Sabbath guitar solo off in the distance, and my mouse hand does this of its own accord:

But then the smoke machine fog dies down, and I'm left with the rest of my programs that don't cause multi-core god rays to appear. This is life with many cores.

  • Custom-built Mac Pro 2010 specs
    • Dual-socket six-core 2.66GHz Westmere Xeon Mac Pro
    • 15GB RAM
    • OCZ Vertex Turbo 120GB system disk
    • 2TB striped RAID working disk
    • ATI 5870 1GB
    • dual NEC 2490WUXi LCDs at 1920x1200
  • Comparison 2009 Mac Pro
    • Dual quad-core 2.66GHz Nehalem Xeon Mac Pro
    • 24GB RAM
    • OCZ Vertex Turbo 120GB system disk
    • 2TB striped RAID working disk
    • ATI 4870 512MB
    • dual NEC 2490WUXi LCDs at 1920x1200

Both machines are using the same hard drives—I reformatted the system disk and put it in the new Mac Pro after running the benchmarks on the 2009 Mac Pro.

The Hardware

The 2010 Mac Pro now comes with an 802.11n Wi-Fi card by default. I always use wired, but this was a dumb thing to make an upgrade because there are times you find you need wireless. The new Mac Pros also come with the magic mouse.

There isn't much else to say about the 2010 internals that wasn't said already in my 2009 Mac Pro review. That's no complaint—the internals of this machine are great, and not much was in need of revising. It's still the easiest Mac ever to upgrade, and all the goodies like the thumbscrew PCI card block are still there:

The memory bay count of eight is still unchanged, so users need to be careful not to fill them for the sake of filling them. My 15GB RAM allocation may seem gross as a number, but it's the proper pairing:

Combining three 1GB with three 4GB modules means that the memory is in running in triple-channel mode. Filling all eight slots wouldn't be the best way to go.

The ATI Radeon 5870

Since I do 3D work, I upgraded from the Radeon 5770 to the Radeon 5870. On a purely aesthetic level, it's a beautiful design:

The 5870 has three outputs: one dual-link DVI and two mini DiplayPorts, so it should drive three screens with resolutions as high as the 27' that Apple just released. I wanted to test it with three LCDs, and thought it would work without any hitches, since my triple 1920x1200 screens are on the conservative side. After receiving a second single-link mini DisplayPort to DVI adapter, I've only been able to use two and, it seems, this is not a bug. If you want to connect to DVI displays (no matter the resolution), you have to use the more expensive mini DisplayPort-to-dual-link-DVI adapters. Apple's docs covering this issue are here:

Just when I was beginning to like mini DisplayPort..

Choose your model

  1. From the Apple () menu, choose About This Mac.
  2. Click More Info.
  3. Select Hardware from the Contents list.
  4. Find 'Number of Processors' under Hardware Overview. The quad-core and 6-core Mac Pro have one CPU and the 8-core and 12-core Mac Pro have two CPUs.
2012Mac Pro (Mid 2012), Quad-core
Mac Pro (Mid 2012), 6-core
Mac Pro (Mid 2012), 12-core
2010Mac Pro (Mid 2010), Quad-core
Mac Pro (Mid 2010), 6-core
Mac Pro (Mid 2010), 8-core
Mac Pro (Mid 2010), 12-core
2009Mac Pro (Early 2009), Quad-core
Mac Pro (Early 2009), 8-core
2008Mac Pro (Early 2008)
EarlierMac Pro (8-core)
Mac Pro (Original)

Applicable models

Mac Pro (Mid 2012), Quad-core
Mac Pro (Mid 2012), 6-core
Mac Pro (Mid 2012), 12-core

Memory specifications

Mac Pro (Mid 2012) computers have these memory specifications:

12 Core Mac Pro Ebay

Quad-core or 6-core8-core or 12-core
Number of processors12
Number of memory slots48
Base memory6 GB8 GB
Maximum memory32 GB64 GB
Memory card specifications- PC3-10600E, 1333 MHz, DDR3 SDRAM UDIMMs and RDIMMs
- Error-correcting code (ECC)
- 72-bit wide, 240-pin ECC modules
- 36 ICs maximum per ECC UDIMM
Additional notes

Important: Apple recommends that you use Apple-approved DIMMs. DIMMs from older Mac computers cannot be used in your Mac Pro. You can purchase Apple-branded memory online from the Apple Store.
Note:

Although the memory speed of the UDIMMS is 1333 MHz, they will operate at 1066 MHz or1333 MHz depending on the processor in the computer.

8GB RDIMMs are also supported. The computer will not start if both types of DIMMS are installed in the same computer. For more information, see Mac Pro (Mid 2010): Registered DIMM support.

Removing or installing memory

Step 1: Determine which Mac Pro you have

  1. Choose Apple (), then About This Mac from the upper-left menu bar.
  2. Click More Info.
  3. Select Hardware from the Contents list.
  4. Find Number Of Processors in Hardware Overview. The quad-core and 6-core Mac Pro have one CPU and 12-core Mac Pro have two CPUs.

Step 2: Remove the side panel

  1. Before you open your Mac Pro, shut it down by choosing Shut Down from the Apple () menu.
    Note: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on.
  2. Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool.
    Warning: Let your Mac Pro cool down before you touch the internal components, which may be very warm.
  3. Touch the metal on the outside of your Mac Pro to discharge any static electricity.
    Note: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don't move around the room until you finish installing the cards, memory, or internal storage device and replace the side panel.
  4. Unplug all the cables and the power cord from your Mac Pro.
    Note: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don't attempt to install items while it's plugged in.
  5. Hold the side panel and lift the latch on the back.
  6. Remove the side panel by pulling the top away from your Mac Pro and lifting up.Important: Hold the side panel securely wile you remove it.

Step 3: Install the memory

In a Quad-Core or 6-Core Mac Pro (Mid 2012):​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
  4. If you are installing equal-size DIMMs (all 2 GB or all 4 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMs1, 2, 3, and 4 (all)

    Note: If you install different sized DIMMs in your Mac Pro, follow the order in the table above. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility should appear onscreen and recommend an improved configuration. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.

  5. Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Remove the DIMMs from the slots.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

In a Quad-Core or 6-Core Mac Pro (Mid 2012):​​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface to protect the tray and avoid scratching the work surface.
  4. If you install equal-size DIMMs (for example, all 2 or 4 GB DIMMs) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slotsFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMs1, 2, 5, and 6
    Six DIMMs1, 2, 3 and 5, 6, 7
    Eight DIMMs1, 2, 3, 4, and 5, 6, 7, 8 (all)

    Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility appears onscreen and recommends an improved configuration.

  5. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

Step 4: Replace the side panel

Note: Always replace the side panel after installing components. Your Mac Pro won't operate properly without the side panel in place.

Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down.

  1. Hold the side panel against your Mac Pro and push the latch down to secure the side panel.
  2. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.

Note: Always replace the side panel after installing components. Your Mac Pro won't operate properly without the side panel in place.

Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down.

  1. Hold the side panel against your Mac Pro and push the latch down to secure the side panel.
  2. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.

Applicable models

Mac Pro (Mid 2010), Quad-core
Mac Pro (Mid 2010), 6-core
Mac Pro (Mid 2010), 8-core
Mac Pro (Mid 2010), 12-core

Memory specifications

The Mac Pro (Mid 2010) computers have these memory specifications:

Quad-core or 6-core8-core or 12-core
Number of processors12
Number of memory slots48
Base memory3 GB6 GB
Maximum memory32 GB64 GB
Memory card specifications- PC3-10600E, 1333 MHz, DDR3 SDRAM UDIMMs and RDIMMs
- Error-correcting code (ECC)
- 72-bit wide, 240-pin ECC modules
- 36 ICs maximum per ECC UDIMM
Additional notes

Important: Apple recommends that you use Apple-approved DIMMs. DIMMs from older Mac computers cannot be used in your Mac Pro. You can purchase Apple-branded memory online from the Apple Store.
Note:

Although the memory speed of the UDIMMS is 1333 MHz, they will operate at 1066 MHz or 1333 MHz depending on the processor in the computer.

8GB RDIMMs are also supported. The computer will not start if both types of DIMMS are installed in the same computer. For more information, see Mac Pro (Mid 2010): Registered DIMM support.

Removing or installing memory

Step 1: Determine which Mac Pro you have

  1. Choose Apple (), then About This Mac from the upper-left menu bar.
  2. Click More Info.
  3. Select Hardware from the Contents list.
  4. Find Number Of Processors in Hardware Overview. The quad-core and 6-core Mac Pro have one CPU and the 8-core and 12-core Mac Pro have two CPUs.

Step 2: Remove the side panel

Mac Pro 12 Core Used

  1. Before you open your Mac Pro, shut it down by choosing Apple (), then Shut Down.

    Note: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on.

  2. Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool.

    Warning: Let your Mac Pro cool down before you touch the internal components, which may be very warm.

  3. Touch the metal on the outside of your Mac Pro to discharge any static electricity.

    Note: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don't move around the room until you finish installing the cards, memory, or internal storage device and replace the side panel.

  4. Unplug all the cables and the power cord from your Mac Pro.

    Note: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don't attempt to install items while it's plugged in.

    Hold the side panel and lift the latch on the back.

  5. Remove the side panel by pulling the top away from your Mac Pro and lifting up.

    Important: Hold the side panel securely wile you remove it.

Step 3: Install the memory

In a Quad-Core or 6-Core Mac Pro (Mid 2010)​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
  4. If you are installing equal-size DIMMs (all 1 GB or all 2 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMs1, 2, 3, and 4 (all)

    Note: If you install different sized DIMMs in your Mac Pro, follow the order in the table above. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility should appear onscreen and recommend an improved configuration. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.

  5. Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Remove the DIMMs from the slots.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

In an 8-Core or 12-Core Mac Pro (Mid 2010)​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface to protect the tray and avoid scratching the work surface.
  4. If you install equal-size DIMMs (for example, all 1 or 2 GB DIMMs) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slotsFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMs1, 2, 5, and 6
    Six DIMMs1, 2, 3 and 5, 6, 7
    Eight DIMMs1, 2, 3, 4, and 5, 6, 7, 8 (all)

    Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility appears onscreen and recommends an improved configuration.

  5. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

Step 4: Replace the side panel

Note: Always replace the side panel after installing components. Your Mac Pro won't operate properly without the side panel in place.

Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down.

  1. Hold the side panel against your Mac Pro and push the latch down to secure the side panel.
  2. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.

Applicable models

Mac Pro (Early 2009), Quad-core
Mac Pro (Early 2009), 8-core

Memory specifications

The Mac Pro (Early 2009) computers have these memory specifications:

Quad-core8-core
Number of processors12
Number of memory slots48
Base memory3 GB6 GB
Maximum memory16 GB32 GB
Memory card specifications- PC3-8500, 1066 MHz, DDR3 SDRAM UDIMMs
- Error-correcting code (ECC)
- 72-bit wide, 240-pin ECC modules
-36 ICs maximum per ECC UDIMM

Removing or installing memory

Step 1: Determine which Mac Pro you have

  1. Choose Apple (), then About This Mac from the upper-left menu bar.
  2. Click More Info.
  3. Select Hardware from the Contents list.
  4. Find Number Of Processors in Hardware Overview. The quad-core and 6-core Mac Pro have one CPU and the 8-core Mac Pro has two CPUs.

Step 2: Remove the side panel

  1. Before you open your Mac Pro, shut it down by choosing Apple (), then Shut Down.

    Note: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on.

  2. Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool.

    Warning: Let your Mac Pro cool down before you touch the internal components, which may be very warm.

  3. Touch the metal on the outside of your Mac Pro to discharge any static electricity.

    Note: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, don't move around the room until you finish installing the cards, memory, or internal storage device and replace the side panel.

  4. Unplug all the cables and the power cord from your Mac Pro.

    Note: To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don't attempt to install items while it's plugged in.

  5. Hold the side panel and lift the latch on the back.
  6. Remove the side panel by pulling the top away from your Mac Pro and lifting up.

    Important: Hold the side panel securely wile you remove it.

Step 3: Install the memory

In a Quad-Core Mac Pro (Early 2009)​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface, to protect the tray and avoid scratching the work surface.
  4. If you are installing equal-size DIMMs (all 1 GB or all 2 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMsAll (1, 2, 3, and 4)

    Note: If you install different sized DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility should appear onscreen and recommend an improved configuration. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.

  5. Open the ejectors on DIMM slots 1, 2, and 3 and push them out to the sides. Remove the DIMMs from the slots.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

In an 8-Core Mac Pro (Early 2009)​

  1. Push the latches on the processor tray until they partially open.
  2. Pull the latches until they open all the way and release the processor tray.
  3. Remove the processor tray and lay it on a soft, clean cloth on the desk or work surface to protect the tray and avoid scratching the work surface.
  4. If you install equal-size DIMMs (all 1, 2, or 4 GB) in your Mac Pro, Apple recommends that you fill the slots in the order listed in the table.
    If you haveFill these slotsFill these slots
    Two DIMMs1 and 2
    Three DIMMs1, 2, and 3
    Four DIMMs1, 2, 5, and 6
    Six DIMMs1, 2, 3 and 5, 6, 7
    Eight DIMMs1, 2, 3, 4, and 5, 6, 7, 8 (all)

    Note: If you install different-size DIMMs in your Mac Pro, follow the order in the table. If the DIMM configuration you install doesn't provide optimized performance, the Memory Slot Utility should appear onscreen and recommend an improved configuration.

    Golf resort builder game for mac pc. Resort Boss: Golf Management Tycoon Golf Game Can you turn your cosy, one-hole course into a bustling, world-famous resort? Craft unique courses and build top-class facilities to keep golf’s wealthiest players coming back.

  5. To use the utility again, go to /System/Library/CoreServices/Memory Slot Utility.
  6. Install the DIMMs by aligning them in the DIMM slots and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.

    Note: To avoid damaging the DIMM, hold it by the corners and don't touch the gold connectors or other components.

  7. Reinstall the processor tray, pushing it in until the latches are at a 45-degree angle.
  8. Push the latches all the way in to close them and seat the processor tray.

Step 4: Replace the side panel

Note: Always replace the side panel after installing components. Your Mac Pro doesn't operate properly without the side panel in place.

Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down.

  1. Hold the side panel against your Mac Pro and push the latch down to secure the side panel.
  2. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.

Applicable models

Mac Pro (Early 2008)
Mac Pro (8-core)
Mac Pro (Original)

Memory specifications

Gaming On A Macbook Pro

This Mac Pro model has these memory specifications:

Number of memory slots2 memory cards with 4 memory slots on each card (4 banks of 2 each)
Base memory2 GB (Two 1 GB fully buffered dual inline memory modules,FB-DIMMs)
Maximum memory32 GB
Memory card specifications- 800 MHz, DDR2, FB-DIMMs
- 72-bit wide, 240-pin modules
- 36 memory ICs maximum per DIMM
- Error-correcting code (ECC)
Additional notesImportant: Apple recommends that you use Apple-approved FB-DIMMs. Other FB-DIMMs may cause your Mac Pro to operate louder or decrease performance to conserve heat. DIMMs from older Mac computers cannot be used in your Mac Pro.

You should install FB-DIMMs in matched pairs of equal size and equal specification. Use the table below and the instructions that follow as guidelines for DIMM placement.

If you haveInstall
Two DIMMs (standard configuration)One on the top memory card and one on the bottom card
Four DIMMsOne pair on the top memory card and one pair on the bottom card
Six DIMMsTwo pairs on the top memory card and one pair on the bottom card
Eight DIMMsTwo pairs on the top memory card and two pairs on the bottom card

Removing or installing memory

Warning: Let your Mac Pro cool down for 5 to 10 minutes before you touch the internal components. The components on the memory cards may be very warm.

Step 1: Remove the side panel

  1. Shut down your Mac Pro.

    Note: Always shut down your Mac Pro before opening it to avoid damaging its internal components or the components you want to install. Do not open your Mac Pro or attempt to install items inside it while it is on.

  2. Wait 5 to 10 minutes to allow the internal components of your Mac Pro to cool.

    Warning: Let your Mac Pro cool down before you touch the internal components, which may be very warm.

  3. Touch the metal on the outside of your Mac Pro to discharge any static electricity.

    Important: Always discharge static before you touch parts or install components inside your Mac Pro. To avoid generating static, do not move around the room until you finish installing the cards, memory, or internal storage device and replace the side panel.

  4. Unplug all the cables and the power cord from your Mac Pro.

    Note:Game center missing on mac windows 10. To avoid damaging internal components or the components you want to install, always unplug your Mac Pro. Don't attempt to install items while it's plugged in.

  5. Hold the side panel and lift the latch on the back.
  6. Remove the side panel by pulling the top away from your Mac Pro and lifting up.

    Important: Hold the side panel securely wile you remove it.

Step 2: Install or remove the memory cards

  1. Using the two finger holes, pull on the memory cards to remove them, then place them on a soft, clean cloth with the DIMMs facing up.
  2. On the bottom memory card, open the ejectors on the DIMM slot and push them out to the sides, and then remove the DIMM from slot 1.

    Important: When installing or removing DIMMs, don't touch the gold connectors on the DIMMs or the memory cards.

  3. Reinstall the DIMM you removed on the top memory card by aligning it in DIMM slot 2, as shown in the illustration, and pushing both ends of the DIMM down until the tabs are vertical and the ejectors snap into place.
  4. Install the first pair of additional DIMMs on the bottom memory card in DIMM slots 1 and 2, the slots closest to the card's gold connectors.

    Important: Always install DIMMs as matched pairs and in the order shown below.

    Move one DIMM from bottom card to top cardFirst pair of additional DIMMs
    Top memory card
    Bottom memory card
  5. If you add a second pair of additional DIMMs, install them on the top memory card in DIMM slots 3 and 4, the last two slots.
    Second pair of additional DIMMsThird pair of additional DIMMs
    Top memory card
    Bottom memory card
  6. If you add a third pair of additional DIMMs, install them on the bottom memory card in DIMM slots 3 and 4.
  7. Lay your Mac Pro down on a soft, clean cloth on the desk or work surface to avoid scratching the work surface or your Mac Pro.
  8. Reinstall each memory card, pushing it straight down until it's seated in the memory slot.

Step 3: Replace the side panel

  1. Stand your Mac Pro up and replace the side panel.

    Important: When you replace the side panel, make sure the latch is up. Hold the side panel securely so it stays in place as you push the latch down.

  2. Hold the side panel against your Mac Pro and push the latch down to secure the side panel.
  3. You can attach a lock or cable through the metal loop to secure your Mac Pro. Flip the lock tab down before you close the latch.

Learn more

Checking that your computer recognizes the new memory

  1. Press the power button to turn on your Mac Pro.
  2. When the Mac OS desktop appears, choose Apple (), then About This Mac and check that the reported amount of memory is correct.

If the reported memory size isn't correct, the computer may be having issues recognizing a memory module. If this happens, shut down your Mac Pro, verify the module specifications against the requirements listed above, and repeat the memory installation instructions to make sure the modules are installed correctly. If you still have issues, remove the memory and consult the support information that came with the memory, or contact the vendor who provided the memory.

Purchasing memory

When purchasing DIMMs for use in Mac computers, make sure that the memory vendor conforms to the Joint Electron Device Engineering Council (JEDEC) specification. Check with your memory vendor to ensure that the DIMMs support the correct timing modes and that the Serial Presence Detect (SPD) feature has been programmed properly, as described in the JEDEC specification.